PowerBuilder 8 OLE insert crash

I had same work with an old PowerBuilder 8 application maintenance and upgrade. While trying to add OLE control to a windows PB constantly crashed. PB and Windows XP reinstall didn't helped. I found a hint here http://brucearmstrong.wordpress.com/2007/07/10/problems-using-activex-controls/In short:1. Download Process Monitor2. Add filter to pb80.exe process and path that begins with HKCR\CLSID3. Try to add OLE with PB (make it crash)4. Find last entry that ends with Control, search this CLSID with regedit5. Reregister dll You found.In my case it was regsvr32 %systemroot%\system32\mstscax.dllProblem solved.


MMA7455 and LGA package

Some time ago I got MMA7455L Three Axis Low-g Digital Output Accelerometer to play with, whohoo! But its an LGA package:Worries no more, a little bit soldering yesterday and now I can proceed testing it:I have not tested it, though, so stay tuned ;)


Nokia (6131 in my case) flashing (programming)

Good info here - http://forum.mobiles.lt/index.php?topic=10487.0In a nutshell:1. Clean PC from any nokia software:Uninstall All Nokia SoftwareUninstall PC SuitRun Nokia_PC_Suite_CleanerClean registry Rename/remove wdf01000.sys from windows\system32\drivers\ 2. Restart PC3. Download and install Pxoenix 20094. Download and install Your phone firmware5. Restart PC6. Connect phone to PC using USB cable7. In Pxoenix 2009 - manage connections, add and apply USB connection8. Scan product (Ctrl+R)9. If phone not found - check cable10. If still no luck - GO TO 1.11. Select Flashing->Firmware update12. Select product (if not selected)13. Press Refurbish14. Pray...You can also Flash dead Nokia which does not start - then:in a step 7 select No connection (remove other connections)in a step 8 just select Open product and select Your productAnd everything at Your own risk !


End of content

No more pages to load