Was investigating some old Fujitsu Siemens Webcam for some project, but it did not work on Windows 10 – windows did not recognize and did not have any drivers for it.
Hardware ID in device manager shows:
USB\VID_0C45&PID_613B&REV_0101
USB\VID_0C45&PID_613B
Searching by vendor and PID did not help.
On the PCB of the webcam, I found that it is SN9C120 + S0I766
Finally searching by SN9C120 that this may be the same as HP Basic Starter Camera. That led me to this Microsoft Update page where finally I have found a working* driver. This driver installed on Windows 10 without problems, but the Camera app was still not working.
On the internet found some general app written on .NET 3.5 for camera capture and finally that was working fine.
If the windows update site is not available, you can find the driver here.
*UPDATE good app to test webcam – https://obsproject.com/
I have been trying to find drivers for a spca504b chipset webcam with no success so far. Seems like they’re only available for 32-bit Windows.